Dynocard CMS1000

Dynacord's compact mixing system has taken a pole position in this segment of the market in terms of sound quality, components and features. Combining a high-quality mixer, two studio-grade digital effects processors, a graphic equalizer and also a professional digital interface for PC or Mac, CMS mixers represent the ideal solution for a wide range of demanding applications in the audio sector. The mixing section starts with 10 of the lowest noise, discrete mic preamps. 6 auxiliary buses, two of which are switchable pre/post faders, allow high flexibility for monitoring. Two effects processors now offer 100 presets, including the legendary PowerMate reverbs. The TAP button allows precise setting of delay times. In addition, each preset can be edited and stored in 20 User memories. The built-in uncompromising USB audio interface shares 4 playback and 4 recording channels simultaneously with a PC or Mac, please see information on drivers available after the studio standard 24-bit / 96 kHz. An optional MIDI interface allows the integration of instruments such as keyboards. A license for Steinbergs Cubase software is part of the package. An 11-band stereo graphic equalizer can be flexibly routed to master or monitor channels. An optional gooseneck light can be attached for dark environments. All faders are protected from dust and at least the balanced XLR outputs for master and monitor emphasize the professional approach. A very robust cover with an integrated handle is optionally available. A solution that offers optimal protection for the device and greater portability without adding a large, heavy flight case.
Intuitive mixer with 10 input channels (6 Mic/Line + 4 Mic/Stereo-Line) 2 High-Quality editable effects, 100 factory and 20 user presets MIDI with professional 4×4 24-bit / 96 kHz USB interface 11-band stereo graphic equalizer Optional sturdy cover with integrated handle

Channels (Mono + Stereo) 6 + 4
Auxiliaries (MON, FX, AUX) 2 Pre, 2 Post, 2 Pre/Post switchable. MIC gain (Mono / Stereo) 0 to +60 dB / +10 to +60 dB. Line/CD/USB GAIN (Stereo) -10 to +20 dB. THD, at 1 kHz, MBW = 80 kHz. MIC input to Master A L/R outputs, +16 dBu, typical < 0.005%. Frequency response, -3 dB, ref. Any input to any mixer output from 1 kHz, 15 Hz to 70 kHz. Crosstalk, 1 kHz. Fader & FX/AUX/MON-Send Attenuation > 85 dB. < -80 dB channel to channel. CMRR, MIC input, 1 kHz > 80 dB. Input sensitivity, all level controls max. position MIC / LINE (Mono) / LINE (Stereo) / CD (Stereo) -74 dBu (155 µV) / -54 dBu (1.55 mV) / -34 dBu (15.5 mV) / -34 dBu (15 .5 mV)

Output impedances
Phones 47 Ω All other outputs 75 Ω Equivalent Input Noise, MIC input, A-weighted, 150 Ohm -130 dBu Noise, Channel inputs to Master A L/R outputs, A-weighted Master fader down -97 dBu Master fader 0 dB, Channel fader down -91 dBu Master fader 0 dB, Channel fader 0 dB, Channel gain unit -83 dBu

Equalization
LO Shelves ±15 dB / 60 Hz MID Peaking, mono inputs ±15 dB / 100 Hz to 8 kHz MID Peaking, stereo inputs ±12 dB / 2.4 kHz HI Shelves ±15 dB / 12 kHz Master EQ 11 ranges (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz) ±10 dB / Q = 1.5 - 2.5

Energy consumption
without lamp / with lamp 45 W / 50 W Filter LO-CUT, mono inputs f = 80 Hz, 18 dB/oct. AUDIO FILTER, mono inputs switchable FEEDBACK FILTER, MON 1/2 70 Hz to 7 kHz, Notch, -9 dB

Effects
Type, effects presets Dual stereo 24/48-bit multi-effects processor, 100 Factory + 20 User, Tap-Delay Remote control Footswitch, MIDI Display 128 x 64 pixels, OLED

Digital audio interface
Channels 4 Input / 4 Output AD/DA Conversion, Sampling rate 24-bit, 44.1 / 48 / 88.2 / 96 kHz PC Interface USB2.0, Female Type B Supported OS See documentation MIDI Interface 5-pin DIN connector, Input / Output

Protection
Mixer Outputs (Relay Controlled) MON 1, MON 2, MASTER A Switching Mode Power Supply (µC controlled) Mains Over/Under Voltage, High Temperature Phantom Power, switchable in groups 48 V DC Power Requirements (SMPS with auto-ranging mains input ) 100 V - 240 V AC, 50 Hz - 60 Hz Dimensions (W x H x D, without cover), mm 510.5 x 155 x 498.5 Rack mount: 483.0 x 135.0 x 443.7